41 You must restart your computer before the new settings will take effect.\n\n Do you want to restart your computer now?
42 This is 3Com Help text...
48 to
49 Found 3Com Device ID :
50 3Com Device ID NOT found!
51 Found Device ID :
52 Value:
53 Deleted key :
54 Deleted key value :
55 Cannot open :
56 This version (%d.%d.%d) of the 3Com NIC driver update program is older than the one that is already installed (%d.%d.%d) on your system.\n\nRunning this program would cause your driver to be downgraded to an older version.
57 PLEASE READ THIS:\n\nThe option you have selected will remove all EtherLink PCI NICs from the system, which will cause a LOSS of network connection and network settings. This option is only meant to be used if the installation of the driver has failed and you wish to reset the system to a configuration where the driver will install cleanly. If you have not already done so we recommend you click Cancel below, write down your network settings and then run this program again.
58 Missing INSTINFO.INI - this program will now terminate
59 The 3Com NIC Driver Update Kit updated your network software successfully.\nYou must restart your system for the changes to take effect. \n\n If you have any 3Com EtherLink PCI NICs to insert into your system, please shutdown your system, insert the NICs and then power your system back on. \n\n Any new NICs will be detected and installed by Windows when your system reboots.
60 This program will remove the 3Com NIC Diagnostic program. Do you wish to continue ?
61 Please reboot the system to delete the files.
62 Operating System not supported - this program will terminate
63 Do you want to continue?
64 The 3Com NIC Driver Update Kit updated your network software successfully. You must restart your system for the changes to take effect. \n\nIf you have any NICs to insert into your system, please shutdown your system, insert the NICs and then power your system back on. To install these NICs, run the 3Com NIC Driver Update Kit again after the system powers back on.
65 Upgrading\n%s to version %d.%d%d
66 Removing\n%s version %d.%d%d
67 Found : %s
68 Found Device ID : %s in %s
69 Found next : %s
70 No INF files in %s
71 Driver Update Canceled.
72 The 3Com NIC Diagnostic program has been removed successfully. You will need to restart your system for all of the changes to take effect.
73 Error getting application information from INI file - exiting app
74 This version (%d.%d.%d.%d) of the 3Com NIC driver update program is not the same as the one that is already installed (%d.%d.%d.%d) on your system. To remove the 3Com NIC Diagnostic program using this version of the 3Com NIC driver update program you must first update the driver to this version and then run this program in remove mode.
75 The 3Com Network Interface Card driver update kit will update your EtherLink PCI NIC. To start the update process click the Update Network Software button. For more information about this program click the Readme button.
76 The 3Com Network Interface Card driver update kit will update your EtherLink PCI NIC. To start the update process click the Update Network Software button. To view the ReadMe file click the ReadMe button
77 Usage:\n %s [options]\n\nOptions:\n /h, /help, /? Display this help box\n /UNATTENDED Run in unattended (silent) mode\n /DIAG Install diagnostics\n /REMOVE Remove diagnostics previously installed by this program\n /INSTALL Install NIC drivers for Etherlink PCI NICs (NT 4.0 only)\n /DIAGONLY Install diagnostics only
78 Driver Update Failed.
79 The 3Com NIC Diagnostics removal program failed.
80 There are no NICs installed in this system that 3Com's NIC Upgrade Program supports.
81 Cannot find and copy %s (%d)
82 3Com NIC Driver Update Kit
83 Cannot set value %s (%d)
84 Cannot open : %s (%d)
85 The 3Com Network Interface Card driver update kit was unable to find any EtherLink PCI NICs, that this kit supports, installed in your system.\n
86 Cannot allocate memory!
87 Cannot find and delete : %s
88 Access denied to %s
89 Cannot delete file (%d)
90 Cannot delete file : %s\%s - (%d)
91 Cannot call application. (%d)
92 Usage:\n %s [options]\n\nOptions:\n /h, /help, /? Displays this help box\n /UNATTENDED Run in Unattended mode\n /DIAG Install diagnostics\n /CLEAN Cleanup botched installs\n /REMOVE remove diagnostics /DIAGONLY install diagnostics only
93 The updated drivers for the EtherLink PCI NIC family requires that some older NICs in the family be removed and reinstalled in the system in order to register those NICs with Windows correctly.\n\nThe affected NICs are the 3C905-TX, 3C905-T4, 3C900-TPO and the 3C900-Combo.\n\nThe 3Com NIC driver update program has detected that you have at least one of these NICs in your system, and these NICs will be removed during the update process.\n\nNOTE: The removal of a NIC will cause the loss of network settings. We suggest you click Cancel below, write down your network settings and then run this program again.\n\nIf you have written down your network settings and if you wish to go ahead with the removal of these NICs, click OK.
94 The 3Com NIC Driver Update Kit has removed all of the EtherLink PCI NICs it supports, from the system. If you have any 3Com EtherLink PCI NICs supported by this program, to insert into your system, please shutdown your system, insert the NICs and then power your system back on. Run the 3Com NIC Driver Update program in the install mode after the system powers back on, to install these EtherLink PCI NICs
95 The 3Com NIC Driver Update Kit has removed all of the EtherLink PCI NICs it supports, from the system. \n\nNOTE: When you restart the system Windows may prompt you for 3Com files. These files have been copied to your system. A path to these files has been added to the pull down bar of this prompt. If the files are not found automatically by Windows just select the path that contains \OPTIONS\CABS in the pull down bar and click OK.
96 The 3Com NIC Driver Update Kit updated your network software successfully. You must restart your system for the changes to take effect. \n\nNOTE: If you insert any new 3Com EtherLink PCI NICs supported by this program, into your system or if you were told that NICs would need to be removed and reinstalled, Windows may prompt you for 3Com files when your computer next starts up. These files have been copied to your system. A path to these files has been added to the pull down bar of this prompt. If the files are not found automatically by Windows just select the path that contains \OPTIONS\CABS in the pull down bar and click OK.
97 The 3Com NIC Driver Update Kit updated your network software successfully. You must restart your system for the changes to take effect. If you have any 3Com EtherLink PCI NICs supported by this program, to insert into your system, please shutdown your system, insert the NICs and then power your system back on. To install these NICs, run the 3Com NIC Driver Update progam in install mode, after the system powers back on.
98 The 3Com NIC Driver Update Kit updated your network software successfully. You must restart your system for the changes to take effect. \n\nIf you have any 3Com EtherLink PCI NICs supported by this program, to insert into your system, please shutdown your system, insert the NICs and then power your system back on. \n\nTo install these NICs, go to the Network Control Panel, click on Add Adapter and choose Other from the list of adapters. When prompted for a location, enter the path to the root of your installation media.
99 The 3Com NIC Driver Update Kit has removed all of the EtherLink PCI NICs it supports, from the system.\n\nIf you have any 3Com EtherLink PCI NICs supported by this program, to insert into your system, please shutdown your system, insert the NICs and then power your system back on. \n\nTo install these NICs, go to the Network Control Panel, click on Add Adapter and choose Other from the list of adapters. When prompted for a location, enter the path to the root of your installation media.\n
100 Do you need to install drivers for any 3Com EtherLink PCI NICs supported by this program ?
101 This version of the 3Com NIC Update program has not been run on this system earlier. \n\nThus, there are no 3Com NIC Diagnostics on this system, that have been installed by this program. \n\nThe remove option will only remove 3Com NIC Diagnostics that have been installed by this program.
102 The 3Com NIC Driver Update Kit updated your network software successfully. You do not need to restart your system.\n\nIf you have any more 3Com EtherLink PCI NICs (supported by this program) to insert into your system, please shutdown your system, insert the NICs and then power your system back on.\n\nThe operating system will detect all new EtherLink PCI NICs. When prompted for the path to install the NIC drivers from, please point to the installation media.
103 The 3Com NIC Driver Update Kit has removed the drivers from the system, for all of the EtherLink PCI NICs supported by this program.\n\nYou need to restart your system now. If you have any more 3Com EtherLink PCI NICs (supported by this program) to insert into your system, please shutdown your system, insert the NICs and then power your system back on.\n\nThe operating system will detect all EtherLink PCI NICs that are supported by this program. When prompted for the path to install the NIC drivers from, please point to the installation media.
104 This program has detected that networking has not been installed on your machine. Due to this, it will not be able to install certain network components specific to 3Com NICs. \n\nChoosing OK on this message will cause this program to exit.\n\nPlease install Windows NT networking and then run this program again to install these network components.\n\nWhen installing Windows NT networking, point to the root of the CD to have the NIC driver (adapter) installed.
105 This version (%d.%d.%d) of the 3Com NIC driver update program is the same as the one that is already installed on your system.\n\nNo changes will be made.
106 Access denied! Please use an administrator account to install or remove the program.
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.